High Velocity Powder Actuated Gun

High velocity gun is used in construction and manufacturing to join materials to hard substrates such as steel and concrete. Known as "Direct Fastening" this technology relies on a controlled explosion created by small chemical propellant charge, similar to the process that discharges a firearm.

Powder-actuated fasteners are usually nails made of high quality hardened steel, although there are many specialized fasteners designed for specification application in the construction and manufacturing industries.

Specification

Power Loads: S43 (.25 cal / 6.3 x 16mm) Four Power Levels

Tool Length: 325 MM

Tool Weight: 2.3 Kg

FastenersHPD6, HEP6 6.25 - 76 MM (Variety Call Barrels)

Power Loads (Cartridge)

Power loads and tools match tolerances to provide optimum power within recognized national velocity standards. Available in color coded 10-load discs, 10-load strips and 100-loads boxes.

Power level is designated by the load level number marked on each box, also by the color of the box and each power load. As the number increases, the power level increases.

Specification

MODEL        D X L         COLOR        POWDER        LEVEL

                                                           Strongest            7

S43               0.25 CAL                        Stronger             6

                     6.3 x 16                          Strong                5

                                                           Medium              4

                                                           Weak                  3

High Velocity Nails - Drive Pin

Drive Pin fastener is a compression type fastener for use with acceptable substrates such as hollow or solid concrete block, masonry or structural concrete.​

Note: Do not use this fastener with polymer batten strips or attachment of insulation.

Specification

50 MM (High Velocity Nail)

Head Dia: 6 MM 

Shank Dia: 3.8 MM

High Velocity Nails - Eye Pin

Drive Pin fastener is a compression type fastener for use with acceptable substrates such as hollow or solid concrete block, masonry or structural concrete.​

.

Specification

50 MM (High Velocity Nail)

Head Dia: 6 MM 

Shank Dia: 3.8 MM

Eyelet Dia: 3.2 MM Yellow Cap

Dry Wall Screw

Drywall screws heads have a curve taper, allowing them to self-pilot install rapidly without punching through the paper cover.

 

Drywall screw is a specialized self-tapping screw with a cylindrical shaft that has proved to have uses far beyond its original application. 

Specification

DESCRIPTION

SIZES

PACKING

1000 PCS BOX

1000 PCS BOX

1000 PCS BOX

1000 PCS BOX

1000 PCS BOX

#6 X 3/4"

#6 X 1"

#6 X 1-1/4"

#6 X 1-1/2"

#6 X 2"

        

DRYWALL SCREW

Fine Thread Black & White

Made in Taiwan

Self Tapping Screw

Self-tapping is the ability of screw to advance when turned, while creating its own thread. This ability is sometimes created by a gap in the continuity of the thread on the screw.

 

These edges cut a thread as the screw is driven into the material. The cutting edge drills away the material, leaving a hole for the screw to go into.

Specification

DESCRIPTION

SELF TAPPING SCREW

Truss Head, Slot Recess & Countersunk Head, Philips Square Recess, Zinc Plated

SIZES

#6 X 1"

#6 X 1-1/4"

#6 X 1-1/2"

#8 X 3/4"

#8 X 1"

#8 X 1-1/4"

PACKING

1000 PCS BOX

1000 PCS BOX

1000 PCS BOX

500 PCS BOX

500 PCS BOX

500 PCS BOX

Wood Screw

Wood screws are a common type of fastening tool designed mainly for wood to wood use, but can be used for a variety of other purpose. These types of screws are used to strengthen joints in the construction, fasten hinges and attach locks.

Wood screws come in varying sizes and designs, such as the head type and shape, and the gauge of the screw.

Specification

DESCRIPTION

WOOD SCREW

Din  97, FLAT HEAD, Philips Drive, ZINC Plated

SIZES

#10 X 40

#10 X 50

#10 X 60

#10 X 70

#10 X 80

PACKING

100 PCS BOX

100 PCS BOX

100 PCS BOX

100 PCS BOX

100 PCS BOX

Self Drilling Screw

As their name implies, self drilling screws operate on the same principal as drill bits and other cutting tools. This means that the way in which these screws are used affects their performance as much how they are designed.

 

For cutting tools the governing factors of material removal are cutting speed, feed rate, depth of work and the work material itself. Typically plain carbon steel which is less stable at high temperature than equivalent high speed steel (HSS) drill bit. 

Specification

DESCRIPTION

SELF DRILLING SCREW

HEX Washer Head with Steel & Rubber separately

SIZES

#14 X 3/4"

#14 X 1"

#14 X 1-1/4"

#14 X 1-1/2"

#14 X 2"

#14 X 2-1/2"

#14 X 3"

PACKING

500 PCS PKT

500 PCS PKT

500 PCS PKT

300 PCS PKT

300 PCS PKT

300 PCS PKT

300 PCS PKT

Concrete Nails

Concrete nails have a fluted end that expands when driven intoconcrete. Masonry nails are V-shaped, with the wider section toward the head of the nail

Specification

DESCRIPTION

SIZES

CONCRETE NAIL

¾”,  1”, 1-1/4”, 1-1/2”, 2”, 2-1/2” , 3” , 3-1/2”, 4”, 5”

PACKING

NK Nails

Nails are typically driven into the work piece by a hammer, a pneumatic nail gun, or a small explosive charge or primer.

 

A nail holds materials together by friction in the axial direction and shear strength laterally. The point of the nail is also sometimes bent over or clinched after driving to prevent pulling out.

Specification

DESCRIPTION

SIZES

NK NAILS

NK 22, NK 27, NK 32, NK 37, NK 42, NK 54, NK 72

PACKING

Nylon Frame Plug

Nylon-products are made from high-grade polyamide, Absorption of humidity results in high mechanical features such as impact strength and resistant to distortion.

 

The following screw types can be used with nylon plugs: s s s (with exception of Hammer screws that contain special nails with single cut threads. It can beIndoor and outdoor applications. It h

Specification

DESCRIPTION

SIZES

FRAME PLUG

6 X 40 (35)

8 X 50 , 8 X 60

8 X 80, 8 X 100

10 X 60, 10 X 80

10 X 100, 10 X 120

10 X 140, 10 X 160

PACKING

Screw Hook

screw hooks are screws with open hooks fashioned at the non-threaded end and lag threaded screws on the other.

 

Great for light-duty applications, it is made with steel for strength and can be used for hanging items

Specification

DESCRIPTION

SCREW HOOK White Zinc Plated, coarse threading self tapping

SIZES

(6.5G) Size #10

PACKING

THREADED ROD

A threaded rod, also known as a stud, is a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod.[1] 

 

They are designed to be used intension.[2] Threaded rod in bar stock form is often called all-thread.

Specification

DESCRIPTION

DIN 975, ZINC PLATED

SIZES

M6 X 3 MTR, M8 X 3 MTR

M10 X 3 MTR , M12 X 3 MTR

M16 X 3 MTR

PACKING

50 PCS BUNDLE

10 PCS BUNDLE

More Products Gallery 

 Copyright © AL Boayz Trading Company LTD. All rights reserved